How to Apply
OUR TRANSFERS ARE A HOT PEEL
DFT Transfers
100% Cotton and Blends
- 300deg Fahrenheit
- Firm pressure
- Press once for 15 seconds
- Peel hot (wait 3-5 secs)
- Re-Press for 3-5 seconds covering with parchment paper
100% Polyester or Spandex
- 260deg Fahrenheit
- Firm pressure
- Press once for 10 seconds
- Peel hot (wait 3-5 secs)
- Re-Press for 3-5 seconds covering with parchment paper
DFT Glitter Transfers
100% Cotton and Blends
- 300deg Fahrenheit
- Firm pressure
- Press once for 15 seconds
- Peel hot (wait 3-5 secs)
- Re-Press for 3-5 seconds covering with parchment paper
100% Polyester or Spandex
- 260deg Fahrenheit
- Firm pressure
- Press once for 10 seconds
- Peel hot (wait 3-5 secs)
- Re-Press for 3-5 seconds covering with parchment paper
UV DFT Decals
OUR TRANSFERS ARE A HOT PEELUV DECALS ARE PERMANENT – PLEASE BE VERY CAREFUL WITH PLACEMENT!
UV DTF Decals can be applied to: Glass, metal, plastic, ceramics, wood, leather, paper, cardboard.
Application Instructions
- Clean the surface you intend to apply your decal. For non porous surfaces, you can use alcohol, or window cleaner with a lint free rag.
- Cut your decal into a manageable size.
- Make sure the transfer print is secure to the top film by laying it on a flat surface, rub with firm pressure using a squeegee tool, credit card, or your fingertip.
- Remove your decal backing: Place face down peel straight back or gently roll the backing film away from the front film and print.
- Apply the decal: Position decal onto the surface, rub with firm pressure using your squeegee tool or fingertip to remove any air pockets/bubbles then peel straight back or roll transfer film to reveal finished decal.
- Not recommended for automobile windows due to high heat buildup